Its been inspired by Sudeep Duhoon Thread , Thank him if possible . Except the rooting part everything is preety much same as Sudeep Duhoon did.
I just found out you could 7.2.3 much easily Root the device rather than editing scripts and all of the stuff which i didn't get from his thread.[No offense sir]
Downloads :
1. Minimal Adb Tool
2. MiFlash_2016.03.30.exe
3. Fastboot 7.2.3 Rom
4. Unlocked EMMC
5. 7.2.3 PATCHED BOOT IMAGE
2. In ADB check if your device is successfully connected using "adb devices" command .
3. NOW , Reboot the phone into EDL mode using this command "adb reboot edl" .
4. Now make sure you're device is connected in "Qualccomm HS-USB QLoader 9008" , if yes continue .
If the device is connected in "Qualcomm HS-USB Diagnostics 900E" Start it from step 1 again.
5. DOWNLOAD 7.2.3 fastboot Rom . Extract the rom.
Download, Extract unlocked_emmc_appsboot.mbn. Rename it to "emmc_appsboot.mbn" And move it inside the extracted ROM FOLDER.
6. Now Start the MI Flash Tool and Browse to the Location Where you have Extracted the Fastboot ROM
7. Go to Advanced and Select:
Flash Programmer, Raw XML File and Patch XML File
from the Fastboot ROM\Images folder.
8. Close the window and click on refresh , Your device with certain COM# will appear. Just click on Flash.
Wait until its successful .
9. Once it is successful , Hard Boot your phone to fastboot using POWER DOWN + POWER ON buttons on your phone.
10. Now in command prompt type "fastboot oem device-info" , you'll see the DEVICE UNLOCKED : FALSE
11. Now Enter the following command "fastboot oem unlock-go" . Your device must be unlocked , to confirm enter the previous[step 9] command again.
YOUR BOOTLOADER IS UNLOCKED NOW
2. Enter the command "fastboot flash recovery twrp.img"
TWRP HAS BEEN SUCCESSFULLY Installed.
P.S : To boot into twrp : volume up + power on . But it might take 2-3 tries to boot into TWRP . [ I don't yet know why this happens .]
2. Install Super Su.
3. Install Boot Image, Dont forget to select install image and boot partition while installing.
4. You've SUCCESFULLY ROOTED your device .
P.S : PLEASE TRY IT ON YOUR OWN RISK.
I just found out you could 7.2.3 much easily Root the device rather than editing scripts and all of the stuff which i didn't get from his thread.[No offense sir]
Downloads :
1. Minimal Adb Tool
2. MiFlash_2016.03.30.exe
3. Fastboot 7.2.3 Rom
4. Unlocked EMMC
5. 7.2.3 PATCHED BOOT IMAGE
Unlocking Bootloader :
1 . Connect your Phone to Computer in USB DEBUG and OEM UNLOCK mode to the computer. [Both of these settings are turned on from developer option.]2. In ADB check if your device is successfully connected using "adb devices" command .
3. NOW , Reboot the phone into EDL mode using this command "adb reboot edl" .
4. Now make sure you're device is connected in "Qualccomm HS-USB QLoader 9008" , if yes continue .
If the device is connected in "Qualcomm HS-USB Diagnostics 900E" Start it from step 1 again.
5. DOWNLOAD 7.2.3 fastboot Rom . Extract the rom.
Download, Extract unlocked_emmc_appsboot.mbn. Rename it to "emmc_appsboot.mbn" And move it inside the extracted ROM FOLDER.
6. Now Start the MI Flash Tool and Browse to the Location Where you have Extracted the Fastboot ROM
7. Go to Advanced and Select:
Flash Programmer, Raw XML File and Patch XML File
from the Fastboot ROM\Images folder.
8. Close the window and click on refresh , Your device with certain COM# will appear. Just click on Flash.
Wait until its successful .
9. Once it is successful , Hard Boot your phone to fastboot using POWER DOWN + POWER ON buttons on your phone.
10. Now in command prompt type "fastboot oem device-info" , you'll see the DEVICE UNLOCKED : FALSE
11. Now Enter the following command "fastboot oem unlock-go" . Your device must be unlocked , to confirm enter the previous[step 9] command again.
YOUR BOOTLOADER IS UNLOCKED NOW
FLASHING TWRP :
1. Move the twrp image in minimal adb folder. Rename the twrp image to twrp.img2. Enter the command "fastboot flash recovery twrp.img"
TWRP HAS BEEN SUCCESSFULLY Installed.
P.S : To boot into twrp : volume up + power on . But it might take 2-3 tries to boot into TWRP . [ I don't yet know why this happens .]
ROOTING :
1. Move SUPER SU and PATCHED BOOT IMAGE into your mobile.2. Install Super Su.
3. Install Boot Image, Dont forget to select install image and boot partition while installing.
4. You've SUCCESFULLY ROOTED your device .
P.S : PLEASE TRY IT ON YOUR OWN RISK.
from xda-developers http://ift.tt/23kikBN
via IFTTT
Aucun commentaire:
Enregistrer un commentaire